MODEL:

Use:
This oil purifier is applicable for hydraulic oil and lubricating oil with low viscosity such as gasoline, kerosene, and diesel. It can remove water and impurities in waste oil to improve quality and reduce the cost of maintenance and pollution.

Parameter List

Item	Name		Unit	RG-30	RG-50	RG-100	RG-125	RG-150	RG-200
Technical Parameter	Nominal Flow		L/H	1800	3000	6000	7500	9000	12000
	Working Pressure		MPa	?0.5
	Oil Temperature		?	?80
	Working Power Supply		V	380V/50Hz(or at user's option)
	Total Power		Kw	0.75	1.1	2.2	3	4	5
	Pipeline Diameter		mm	32	32	38	38	45	45
	Net Weight		Kg	350	400	500	550	650	800
	Overall Dimensions	Length	mm	1200	1200	1300	1300	1400	1500
		Width	mm	700	800	900	900	1000	1100
		Height	mm	1100	1150	1300	1300	1400	1500
Index for Oil Treatment	Water Content		%	?100(GB/T7600)
	Filtration Precision		um	?10

MODEL:

Application:
This kind of purifier is applicable to purification of various used black engine oil from transport facilities such as ship and automobile. This machine can remove the tiny impurities dispersed in oil such as carbon particles and deep oxides, as well as bad substance such as colloid and bitumen. Thus, the clarity of oil is recovered and the color of used black engine oil is restored.
Features:
1. This machine adopts physical & chemical theory to get the refined and regenerated oil.
2. with the special waste gas collecting and absorbing device, this machine can stop most of the harmful gas going into the air and be friendly to the environment.
3. The fine filtering system use fully-automatic filter press with liquid press method to remove impurities, which have big area to filter impurities and can be operated and maintained easily.
4. The advanced fully-automatic temperature controlling system, liquid-level controlling system, defoaming controlling system, pressure protecting system and excellent equipment can ensure operation of the machine with high performance.
5. Indirect heating used by the heating system to ensure waste oil to be heated evenly and the temperature of waste oil to be stable.
6. The vacuum system is used for high-level removing the micro water and the left gas of the waste oil.
7. This machine also installed phase-sequence and open-phase protection and creepage-proof protection.
Technical Parameter List

 

Name	Unit	ZLE-I	ZLE-II	ZLE-III	ZLE-IV
Capacity	Kg/D	1000-2000	2000-4000	4000-8000	8000-16000
Recovery Rate	%	80-95 (or follow requirement of waste oil )
Working Pressure	Mpa	?0.4?0.6
Noise	dB(A)	?65?80
Power Supply	V/Hz	380/50(or at user's option)
Total Power	KW	55	70	140	200
Weight	KG	2500	3500	5000	8000
Remark	The capacity is based on that the oil purifier works 8-16 hours per day.

MODEL:

Use:
JY is widely used to regenerate and purify the deteriorated transformer oil, circuit breaker oil, capacitor oil, low viscosity lubricating oil, in power generation plants, transformer stations, electric transmission and supplying company, factories, mines, railway transportation, etc.
It can be used as special equipment for electric power transformer maintenance. Not only can it remove water, gas, and other impurities from the oil, but also it can remove oxide materials and remove free carbon in the deteriorated oil to lower the PH value, improve its breakdown voltage and quality. Also serving as the vacuum oiling equipment and drying equipment, this filter can live line work on the spot.

Feature:
? High-efficiency degassing and dehydration system, it has adopted vacuum flash vaporization technology to remove water and gas in oil.
? Precision filtration system, high-quality filter element, multi-stage filtration with gradual precision can help to remove mechanical impurities in the oil.
? Safe heating system with swirling tube, quick temperature increasing, stable and even temperature.
? An advanced fully automatic temperature controlling system, liquid-level controlling system , defoaming controlling system, pressure protecting system and excellent configuration can ensure operation of the equipment with high performance.
? Obvious effect on degraded insulating oil treatment online with its lamps indicative of the conditions of operation, and it is designed flexibly with low noise, deep purification and free maintenance.
? Chain safety protection system, an interlocking of oil drainage system, vacuum system and heating system, which avoids any possible negative impacts caused by incorrect manipulation.

Optional mode:
? The customers'request can be met by adopting PLC intelligent control. Touch screen and dynamical display.
?On online water tester is available.
? Available in mobile option. immovable option and trailer.
?Oil purifier can be made in hermetical, canopy-covering ? open and frame style.
?Color of the oil purifier can follow customers'favor.

Parameter List

Item	Name		Unit	JY-20	JY-30	JY-50	JY-100	JY-150	JY-200	JY-300
Technical Parameter	Flow		L/H	1200	1800	3000	6000	9000	12000	18000
	Operating Vacuum Degree		MPa	-0.06? -0.096
	Working Pressure		MPa	?0.5
	Temperature Range		?	20 ? 80
	Power Supply		V	380V/50Hz(or at user?s option)
	Working Noise		dB(A)	?78
	Heating Power		Kw	24	24	30	45	90	135	180
	Total Power		Kw	27	27	35	50	95	142	191
	Pipeline Diameter		mm	25	25	32	40	50	50	65
	Net Weight		Kg	400	450	550	680	800	850	1150
	Overall Dimensions	Length	mm	1000	1070	1200	1300	1450	1450	1600
		Width	mm	1000	1000	1150	1250	1450	1450	1600
		Height	mm	1500	1550	1750	1800	2100	2100	2100
Index for Oil Treatment	Water Content		PPM	?5(GB/T7600)
	Gas Content		%	?0.1(GB/T423)
	Mechanical Impurity		%	No(GB/T511)
	Breakdown Voltage		KV	45 ? 70(GB/T507)
	Filtration Precision		µm	?5

MODEL:

Use:
ZL is widely used in electric power, chemical engineering, traffic, railway, etc, ZL series oil purifier

are suitable especially for purifying and restoring hydraulic oil, machine oil, coolant oil and various other lubrication oil. The most breakdown of machinery which has lubrication oil system results from contaminated lubrication in which has water, gas, impurities etc. ZL series can rapidly remove water, gas, particulate matters and impurities from lubrication oil and improve properties of lubricating oil so as to greatly extend lifetime of machinery which has lubrication system.

Feature:
? Perfect capability of removing impurities, mass and deep precision purification material enabling removal of tiny and fine particles in oil. Meanwhile, it is equipped with permanent magnet filter to filter ferruginous impurites.
? Unique water/gas removal system, which adopts stereo-evaporating technology, multi-oil water separation technology, enabling fast removal of water, and gas in the oil.
? Optimized electric heating system with automatic constant temperature controller ensures that oil temperature to be even and stable.
? An advanced fully automatic temperature controlling system, liquid-level controlling system, defoaming controlling system, pressure protecting system and excellent configuration can ensure operation of the equipment with high performance.
? Online work, allowing separated operation of manual operators from machine with lamps indicating the condition for operation.
? It is humanization design with low noise, deep purification and long time free maintenance to save cost from the running process.

Optional mode:
? The customers' request can be met by adopting PLC intelligent control, touch screen and dynamical display.
? On line water tester is available.
? Available in mobile option, immovable option and trailer.
? Oil purifier can be made in hermetical, canopy-covering, open and frame style.

? Color of the oil purifier can follow customers' favor.

Parameter List

MODEL:

Use:
TY is applicable for thermoelectric generating set ,hydroelectric generating set, nuclear power plant ,industrial turbine set and other industries where the turbine oil is used ,It can purify the turbine oil before the oil deteriorates .TY is good at emulsion breaking, dehydration and removing water ,gas, soap, gelatin, acid, pigment and mental particulates in emulsified turbine oil and low-viscosity lubricating oil ,which can recover the emulsified turbid oil to limpid and clear oil .After treatment ,the oil quality index can meet the requirement of the Quality Standard GB/T7596-2000 for Turbine Oil In-Service ,Which ensures that the unit regulating system and lubrication system work normally and prolongs the maintenance peried.
Feature:
? It has the coalescence and separation technique, and three-dimensional flash distillation technique, and it has strong ability to break emulsion and remove water from the oil.
? Latest Chinese and international process which is an integration of gravity method, evaporation method, aggregation method, vacuum separation and mechanical purification.
? Precise multi-stage filtration system helps to remove different kinds of impurities with high quality filter element of better ability of containing pollutants and long service life.
? Optimized heating system with automatic constant temperature controller ensures that oil temperature to be even and stable.
? An advanced fully automatic temperature controlling system, liquid-level controlling system , defoaming controlling system, pressure protecting system and excellent configuration can ensure operation of the equipment with high performance.
? It can purify any kinds of turbine oil used in steam turbine and water turbine online and onsite, and with its lamps indicative of the conditions for operation.
?Chain safety protection system, an interlocking of oil drainage system , vacuum system and heating system , which avoids any possible negative impacts causes by incorrect manipulation.
?It is humanization design with low noise, deep purification and long time free maintenance to save cost from the running process.

Optional mode:
?The customers' request can be met by adopting PLC intelligent control, touch screen and dynamical display.
?On line water tester is available.
? Available in mobile option, immovable option and trailer.
?Oil purifier can be made in hermetical, canopy-covering, open and frame style.
?Color of the oil purifier can follow customers' favor.


Parameter List

Item	Name		Unit	TY-20	TY-30	TY-50	TY-100	TY-150	TY-200	TY-300
Technical Parameter	Flow		L/H	1200	1800	3000	6000	9000	12000	18000
	Operating Vacuum Degree		MPa	-0.06? -0.096
	Working Pressure		MPa	?0.5
	Temperature Range		?	20 ? 80
	Power Supply		V	380V/50Hz(or at user's option)
	Working Noise		dB(A)	?78
	Heating Power		Kw	24	24	30	45	90	135	180
	Total Power		Kw	27	27	35	50	95	142	191
	Pipeline Diameter		mm	25	25	32	40	50	50	65
	Net Weight		Kg	400	450	550	680	800	850	1150
	Overall Dimensions	Length	mm	1070	1070	1200	1300	1450	1450	1600
		Width	mm	1000	1000	1150	1250	1450	1450	1600
		Height	mm	1500	1550	1700	1800	2100	2100	2000
Index for Oil Treatment	Water Content		mg/L	?50(GB/T7600)
	Mechanical Impurity		%	No(GB/T511)
	Acid Value		mgkoH/g	?0.3(GB/T264)
	Demulsifying Value		min	?15(GB/T7305)
	Filtration Precision		µm	?10

MODEL:

Use:
ZJA is widely used in electric power, transforming electricity industry, metallurgy, chemical engineering, traffic, railway and others. It is designed for the vacuum filter of expensive oil such as fresh oil, imported oil, instrument transformer oil, extra-high tension transformer oil (cover110v, major transformer), and for vacuum oiling, and drying of transformers. This filter can live line work on the spot.

Feature:
? Advanced dehydrating and degassing system that uses large area three-dimensional flash distillation technique to remove harmful composition in the oil such as water, air and gas.
? It can be widely used for oil filling for transformers and circuit breakers under vacuum condition.
? Precise filtration system, high-quality filter element , multi-stage filtration with gradual precision can help to remove mechanical impurities in the oil.
? An advanced fully automatic temperature controlling system , liquid-level controlling system ,defoaming controlling system, pressure protecting system and excellent configuration can ensure operation of the equipment with high performance.
? Online work , allowing separated operation of manual operates from machine with lamps indicating the condition for operation.
? It is humanization design with low noise , deep purification and long time free maintenance to save cost from the running process.
? Purifiers are equipped with a chain safety protective system, an interlocking of oil drainage system ,vacuum system and heating system which avoids any possible negative impacts caused by mal-operation.

Optional mode:
? The customers'request can be met by adopting PLC intelligent control. Touch screen and dynamical display.
? On online water tester is available.
? VFD (Variable Frequency Drive) is available.
? Flow meter with accumulated function is available.
? Extra system of pumping vacuum for transformer is available.
? Available in mobile option. immovable option and trailer.
? Oil purifier can be made in hermetical, canopy-covering or open and frame style.
? Color of the oil purifier can follow customers'favor.

Parameter List

MODEL:

Use:
ZRG is used in petroleum fields, chemical engineering, metallurgy electric power etc, ZRG series can efficiently remove water, air, gas and other impurities from oil and enhance its breakdown voltage. It can be used online and onsite without interference of power supply or replacement of fresh oil. And it can keep all the control systems operating normally.

Feature:
   Integrating the two functions of dehydrating device and vacuum oil purifier, rapidly reducing the water to less than 100ppm.
   A superior purification system with top quality filter element, which can accommodate largely quantity of dirt and is dandified progressively step by step. The filter element has got a high precision, multi-stage filtration and high efficiency dehydrating.
   Online work, allowing separated operation of manual operators from machine with lamps indicating the condition for operation.
   It is humanization design with low noise, deep purification and long time free maintenance to save cost from the running process.


Optional mode: 
   The customers' request can be met by adopting PLC intelligent control, touch screen and dynamical display. 
   On line water tester is available. 
   Available in mobile option, immovable option and trailer. 
   Oil purifier can be made in hermetical, canopy-covering, open and frame style. 
   Color of the oil purifier can follow customers' favor.

Parameter List

Item	Name		Unit	ZRG-30	ZRG-50	ZRG-100	ZRG-150	ZRG-200	ZRG-300	ZRG-500
Technical Parameter	Flow		L/H	1800	3000	6000	9000	12000	18000	30000
	Operating Vacuum Degree		MPa	-0.06 ? -0.096
	Working Pressure		MPa	? 0.5
	Temperature Range		?	20 ? 80
	Power Supply		MPa	380V/50Hz(or a user's option)
	Working Noise		dB(A)	? 78
	Heating Power		kW	24	30	45	90	135	180	216
	Total Power		MPa	27	35	50	95	142	191	230
	Pipeline Diameter		?	25	32	40	50	50	65	80
	Net Weight		Kg	450	550	680	850	900	1200	1800
	Overall Dimensions	Length	mm	1070	1200	1300	1450	1450	1600	1800
		Width	mm	1000	1150	1250	1450	1450	1600	1800
		Height	mm	1550	1750	1800	2100	2100	2100	2100
Index for Oil Treatment	Water Content		mg/L	? 100(GB/T7600)
	Mechanical Impurity		%	No(GB/T511)
	Filtration Precision		um	? 10

MODEL:

Use:

This oil purifier is used to purify hydraulic oil, emulsified oil, cutting oil, turbine oil, rust-resistant oil, scouring oil, composed oil, insulating oil, machine oil and other kinds of lubricating oil. This oil purifier can remove impurities in oil with high precision of Nass 5-7( precision by only one pass), can absorb water and prevent acidity go higher to keep nature of oil. There are three branch series of CGL high precision oil purifier.
CGL-I series: whole flow high precision oil purifier with motor, motor power is 220V three phase ( or at user's option). The pressure range is 5kgf/cm2.
CGL--II series: bypass type on-line oil purifier which can be used in machine with high pressure. eg. molding machine, hydraulic pressure punch, casting machine. The pressure rang is 10-210kgf/cm2.



Technical Parameter List

Model	CGL-I-30/ CGL-II-30	CGL-I-100/ CGL-II-100
Flow	1.5L/min	3.0L/min
Oil Temperature Rang	0?~80?	0?~80?
Viscosity range	9~180CSt	9~180CSt
Caliber of Inlet and Outlet	RC1/4	Inlet RC1/4 Outlet RC1/4
Weight	2~2.5kg	6~6.5kg
Capacity of Oil Tank	Max 400L	Max 800L

MODEL:

Use:
This purifier is suitable for easy combustible and explosive environment in industrial and mining enterprise. It can filter impurity while transporting turbine oil, refrigerator oil, hydraulic oil and other oils, It can meet the requirement of long distance and high lift oil filling and pumping for lubrication system. It can filter impurities online. Explosion-proof labels: ExdII BT4, ExdII CT4.

Feature:
   Adopts the magnetic starter..
   The machine will alarm and stop working, when the pressure is over-high..
   The machine filters the solid pollutant quickly and efficiently.
   Compact structure, small, convenient to move and use.
   Users can choose filtration precision and filtration stage.
   Specifications are optional.

Parameter List

Name	Unit	JL-20E	JL-50E	JL-100E	JL-150E	JL-200E	JL-300E	JL-500E
Flow	L/h	1200	3000	6000	9000	12000	18000	30000
Power Supply	V	380V/50Hz(or at user?s option)
Power	KW	1.5	1.5	1.5	3	4	5.5	7.5
Pipeline Diameter	mm	32	32	40	50	50	60	80
Net Weight	Kg	120	150	170	200	220	250	300
Length*Width*Height	mm	600*700 *850		650*700 *850	700*750 *900		900*750 *1000	1100*850 *1000
Filtration Precision	um	1 - 10(or as needed)
Filtration Stage		2 Stages(or as needed)

MODEL:

Use:
This purifier is applicable for power station, oil storage, metallurgical, chemistry, mechanical and others industries, It is used to transport all kinds of lubricating oil while removing impurities and the little moisture from the oil, It can meet the requirement of long distance and high lift oil filling and pumping for lubrication system. It can filter impurities online. Explosion-proof type can be made according to clients'
requirements.

Feature:
   With the heating installation.
   Automatic thermostatic control, with adopting French Schineider Electric.
   The machine will alarm and stop working, when the pressure is over-high.
   Compact structure, small, convenient to move and use.
   Users can choose filtration precision and filtration stage.
   Specifications are optional.

Parameter List

Name	Unit	JL-20C	JL-50C	JL-100C	JL-150C	JL-200C	JL-300C	JL-500C
Flow	L/H	1200	3000	6000	9000	12000	18000	30000
Power Supply	V	380V/50Hz(or at user's option)
Power	KW	1.5	1.5	1.5	3	4	5.5	7.5
Pipeline Diameter	mm	32	32	40	50	50	60	80
Net Weight	Kg	120	150	170	200	220	250	300
Length*Width*Height	mm	600*800 *850		650*800 *850	700*850 *900		900*850 *1000	1100*950 *1000
Filtration Precision	µm	1 - 10 (or as needed)
Filtration Stage		2stage(or as needed)

MODEL:

Use:
This purifier is used to transport oils and remove impurities from turbine oil, insulating oil, lubricating oil and other oils, specially for field and aloft work. It can meet the requirement of long distance and high lift oil filling and pumping for lubrication system. Explosion-proof type can be made according to clients? repuirements.

Feature: 
   It is characterized by small size, light weight, convenient to carry and use. 
   Users can choose filtration precision .
   Specifications are optional.

Technical Parameter List

Name		Unit	JL-10B	JL-20B	JL-30B
Flow		L/H	600	1200	1800
Working pressure		Mpa	?0.5
Power Supply		V	380V/50Hz(or as needed)
Working Noise		dB	?75
Motor Power		KW	0.37
Inlet(Outlet) Diameter		mm	19
Net Weight		Kg	25
Overall Dimensions	Length	mm	300
	Width	mm	300
	Height	mm	400
Filtration Precision		µm	1 ?10(or as needed)
Filtration Stage			1 Stage(or as needed)

MODEL:

Use:
This purifier is used in power station, power plants, administration of power supply, oil storage, metallurgical, chemistry, railway, mechanical, aviation and others industries. It is applicable for removing impurities while oil is transported , from mechanical oil, hydraulic oil, turbine oil, compressor oil, insulating oil, gasoline and diesel engine oil, and other liquid medium. It can meet the requirement of long distance and high lift oil filling and pumping for lubrication system. It can filter impurities online.

Feature: 
   Adopt France Schineider Electric.
   The machine will alarm and stop working. When the pressure is over- high.
   The machine filters the solid pollutant quickly and requires no oil filter paper. 
   The machine is light , flexible and convenient to move. 
   Users can choose filtration precision and filtration stage. 
   Specifications are optional.

Technical Parameter List

Name		Unit	JL-20A	JL-50A	JL-100A	JL-150A	JL-200A	JL-300A	JL-500A
Flow		L/H	1200	3000	6000	9000	12000	18000	30000
Working pressure		Mpa	?0.5
Power Supply		V	380V/50Hz(or as needed)
Working Noise		dB(A)	?75
Motor Power		KW	1.5	1.5	1.5	3	4	5.5	7.5
Pipeline		mm	32	32	40	50	50	60	80
Net Weight		Kg	120	150	170	200	220	250	300
Overall Dimensions	Length	mm	600	600	650	700	700	900	1100
	Width	mm	700	700	700	750	750	750	850
	Height	mm	850	850	850	900	900	1000	1000
Filtration Precision		µm	1 ? 10(or as needed)
Filtration Stage			2 Stage(or as needed)

MODEL:

Use:
This purifier is widely used in power station, power plants, transformer station, petroleum, chemistry, metallurgical and national defense industries. It is designed for filtering water and impurities of transformer oil, turbine oil, hydraulic oil and other oils. It adopts filter papers as filtering substance.
Feature:
  It is quick and convenient to replace the filter paper.
  Simple structure and easy to use.
  Low cost for operation.


Optional mode:
the clients' requirements can be met by adopting automatic fluid level control and automatic pressure alarm.

Technical Parameter List

Name		LY-30	LY-50	LY-100	LY-150	LY-200	LY-300
Flow (L/H )		1800	3000	6000	9000	12000	18000
Working pressure(Mpa)		?0.3
Filtration Area(m2)		0.6	0.78	1.3	1.89	2.5	3.2
Board Frame Size(mm)		280*280					300*300
Press Manner		Screw Manually
Motor Power(kw)		1.5	1.5	1.5	4.0	4.0	5.5
Working Power Supply(V)		380V/50HZ(or at user's option)
Pipeline Diameter(mm)		25	25	32	40	40	50
Filter Paper Size(mm)		300*300					320*320
Overall Dimensions	Length(mm)	800	800	950	1450	1250	1600
	Width(mm)	450	450	500	500	500	600
	Height(mm)	900	900	1000	1050	1050	1100
Net Weight(kg)		150	180	240	320	360	580

Dimension and weight will be changed with the changing of the technical specification.

MODEL:

Use:
This purifier is used to purify Lubricating oil for oil-pressure machinery. It can remove impurities and moisture from the oil, to prevent the oil oxidizing and acidity rising, keep the oil lubricative, prolong the service life of the equipment and ensure the continuous trouble-free run of the equipment.

Feature:
  An independent oil pump is set in the oil purifier, which can continuously purify oil, and the filtration precision NAS5 to 7.
  The machine can absorb all moisture in the oil, caused by difference in temperature.
  The machine will alarm and stop working, once the creepage, over-pressure, and filter element saturation happen.
  Indication of replacing filter element.
  Two functions for oil filtering and pumping
   With positive and negative switch. avoiding the trouble of three phase electrical wire connection.
  Easy to operate or maintain. 
   Many models are optional, with flow from 6L/min to 40L/min.

Technical Parameter List

Item / model		BRH 6-2LS	BRH 8-3LS	BRH 10-4LS	BRH 12-5LS	BRH 16-6LS	BRH 24-8LS	BRH 30-10LS	BRH 40-15LS
Flow (L/min )		6	8	10	12	16	24	30	40
Working pressure(Mpa)		1.5-3.0	1.5-3.0	1.5-3.0	1.5-3.0	1.5-3.0	1.5-3.0	1.5-3.0	1.5-3.0
Inlet(outlet) Diameter(mm)		15	20	20	25	25	25	32	32
Cartridge No.		2	3	4	5	6	8	10	15
Weight(kg)		65	80	98	115	120	125	145	180
Motor power(kw)		0.37	0.37	0.37	0.55	0.55	0.55	1.1	1.1
Applicable tank capacity (L)		1000	2000	3000	4000	5000	6000	7000	8000
Overall Dimensions	Length(mm)	660	720	940	980	1210	1210	1440	1540
	Width(mm)	430	510	510	510	510	510	510	510
	Height(mm)	630	640	640	640	640	640	640	640

Dimension and weight will be changed with the changing of the technical specification.

MODEL:Use:
This oil purifier is applicable for hydraulic oil and lubricating oil with low viscosity such as gasoline, kerosene, and diesel. It can remove water and impurities in waste oil to improve quality and reduce the cost of maintenance and pollution.

MODEL:Use:
ZRG is used in petroleum fields, chemical engineering, metallurgy electric power etc, ZRG series can efficiently remove water, air, gas and other impurities from oil and enhance its breakdown voltage. It can be used online and onsite without interference of power supply or replacement of fresh oil. And it can keep all the control systems operating normally.

Feature:
   Integrating the two functions of dehydrating device and vacuum oil purifier, rapidly reducing the water to less than 100ppm.
   A superior purification system with top quality filter element, which can accommodate largely quantity of dirt and is dandified progressively step by step. The filter element has got a high precision, multi-stage filtration and high efficiency dehydrating.
   Online work, allowing separated operation of manual operators from machine with lamps indicating the condition for operation.
   It is humanization design with low noise, deep purification and long time free maintenance to save cost from the running process.


Optional mode:
  The customers' request can be met by adopting PLC intelligent control, touch screen and dynamical display. 
  On line water tester is available.
  Available in mobile option, immovable option and trailer. 
  Oil purifier can be made in hermetical, canopy-covering, open and frame style. 
  Color of the oil purifier can follow customers' favor.

MODEL:Use:

This oil purifier is used to purify hydraulic oil, emulsified oil, cutting oil, turbine oil, rust-resistant oil, scouring oil, composed oil, insulating oil, machine oil and other kinds of lubricating oil. This oil purifier can remove impurities in oil with high precision of Nass 5-7( precision by only one pass), can absorb water and prevent acidity go higher to keep nature of oil. There are three branch series of CGL high precision oil purifier.
CGL-I series: whole flow high precision oil purifier with motor, motor power is 220V three phase ( or at user's option). The pressure range is 5kgf/cm2.
CGL--II series: bypass type on-line oil purifier which can be used in machine with high pressure. eg. molding machine, hydraulic pressure punch, casting machine. The pressure rang is 10-210kgf/cm2.

MODEL:Use:
This oil purifier is applicable for hydraulic oil and lubricating oil with low viscosity such as gasoline, kerosene, and diesel. It can remove water and impurities in waste oil to improve quality and reduce the cost of maintenance and pollution.

MODEL:Use:
This oil purifier is applicable for hydraulic oil and lubricating oil with low viscosity such as gasoline, kerosene, and diesel. It can remove water and impurities in waste oil to improve quality and reduce the cost of maintenance and pollution.

MODEL:Use:
ZRG is used in petroleum fields, chemical engineering, metallurgy electric power etc, ZRG series can efficiently remove water, air, gas and other impurities from oil and enhance its breakdown voltage. It can be used online and onsite without interference of power supply or replacement of fresh oil. And it can keep all the control systems operating normally.

Feature:
   Integrating the two functions of dehydrating device and vacuum oil purifier, rapidly reducing the water to less than 100ppm.
   A superior purification system with top quality filter element, which can accommodate largely quantity of dirt and is dandified progressively step by step. The filter element has got a high precision, multi-stage filtration and high efficiency dehydrating.
   Online work, allowing separated operation of manual operators from machine with lamps indicating the condition for operation.
   It is humanization design with low noise, deep purification and long time free maintenance to save cost from the running process.


Optional mode: 
   The customers' request can be met by adopting PLC intelligent control, touch screen and dynamical display. 
   On line water tester is available. 
   Available in mobile option, immovable option and trailer. 
   Oil purifier can be made in hermetical, canopy-covering, open and frame style. 
   Color of the oil purifier can follow customers' favor.

MODEL:Use:
BZL is designed for petroleum industry, petrochemical industry, chemical industry, machine manufacture, coal mining, metallurgy, power plant where are easily exposed to explosion and fire, the heating system, electric equipments, electric machinery, solenoid valves are well-protected with explosion-proof labels indicative of different levels of dangers such as Exd II BT4, Exd II CT4. This filter can be widely applied to the purification of many types of oil such as turbine oil, hydraulic oil, refrigerator oil and lubricanting oil . Through its special fittings, the filter can effectively remove harmful elements such as water, mechanic purity, gas in oil and restore it to a useable condition. It is safe for ammonia containing oil to operate in the filter for a long time.

Feature:
   Designed for preventing firing or exploding environment.
   Unique water/gas removal system, which is enable to fast remove water, gas and light hydrocarbon in oil.
   Precise fine multi-stage filtration helps to remove mechanical impurities in oil.
   An advanced fully automatic temperature controlling system, liquid-level controlling system , defoaming controlling system, pressure protecting system and excellent configuration can ensure operation of the equipment with high performance.
  Online work , allowing separated operation of manual operators from machine with lamps indicating the condition for operation.

  It is humanization design with low noise , deep purification and long time free maintenance to save cost from the running process.
  Chain safe protection system, pressure protection device, interaction of oil inlet and heating, which avoids influence of incorrect manipulation.

Optional mode:
  Available in mobile option. immovable option and trailer.
  Oil purifier can be made in hermetical, canopy-covering , open and frame style.
  Color of the oil purifier can follow customers ' favor.

MODEL:

Use:
ZRG is used in petroleum fields, chemical engineering, metallurgy electric power etc, ZRG series can efficiently remove water, air, gas and other impurities from oil and enhance its breakdown voltage. It can be used online and onsite without interference of power supply or replacement of fresh oil. And it can keep all the control systems operating normally.

Feature:
 Integrating the two functions of dehydrating device and vacuum oil purifier, rapidly reducing the water to less than 100ppm.
 A superior purification system with top quality filter element, which can accommodate largely quantity of dirt and is dandified progressively step by step. The filter element has got a high precision, multi-stage filtration and high efficiency dehydrating.
 Online work, allowing separated operation of manual operators from machine with lamps indicating the condition for operation.
 It is humanization design with low noise, deep purification and long time free maintenance to save cost from the running process.


Optional mode: 
    The customers' request can be met by adopting PLC intelligent control, touch screen and dynamical display. 
    On line water tester is available.
    Available in mobile option, immovable option and trailer. 
    Oil purifier can be made in hermetical, canopy-covering, open and frame style.
    Color of the oil purifier can follow customers' favor.

MODEL:Use:
This unit is used to vacuum-pump of the electrical vacuum device in transformer substation, administration of power supply, power generation plant, and transformer manufactory, and it can vacuum pump in vacuum melting, welding, drying, chemical pharmacy. ZJ operates in vacuum degree of 133Pa, and its limit vacuum degree is 5Pa.But it is unsuitable for pumping toxic gas, explosive gas, high-oxygen content gas, high-moisture content gas, and the gas which will be reaction to pump oil or cause erosive effect on ferrous metal..

Feature:
  Quick starting, high pumping rate, stable performance, easy-handling.
  The unit takes Roots Pump as main pump and spinning vacuum pump ad pre-stage pump..
  A vacuum meter is used to meter and control vacuum of pumped container..
 The unit adopts French Schineider Electric as control element.. 
Full-automatic and non-presence of operation with lamps indicating the condition of operation.
  Humanization design, low noise, less energy expenditure, economical to circulate cost.
Optional mode:
  The customers' request can be met by adopting PLC intelligent control, touch screen and dynamical display.
  Available in mobile option, immovable option and trailer.
  Oil purifier can be made in hermetical, canopy-covering, open and frame style.

MODEL:Description:

Use:
ZL is widely used in electric power, chemical engineering, traffic, railway, etc, ZL series oil purifier

are suitable especially for purifying and restoring hydraulic oil, machine oil, coolant oil and various other lubrication oil. The most breakdown of machinery which has lubrication oil system results from contaminated lubrication in which has water, gas, impurities etc. ZL series can rapidly remove water, gas, particulate matters and impurities from lubrication oil and improve properties of lubricating oil so as to greatly extend lifetime of machinery which has lubrication system.

Feature:
? Perfect capability of removing impurities, mass and deep precision purification material enabling removal of tiny and fine particles in oil. Meanwhile, it is equipped with permanent magnet filter to filter ferruginous impurites.
? Unique water/gas removal system, which adopts stereo-evaporating technology, multi-oil water separation technology, enabling fast removal of water, and gas in the oil.
? Optimized electric heating system with automatic constant temperature controller ensures that oil temperature to be even and stable.
? An advanced fully automatic temperature controlling system, liquid-level controlling system, defoaming controlling system, pressure protecting system and excellent configuration can ensure operation of the equipment with high performance.
? Online work, allowing separated operation of manual operators from machine with lamps indicating the condition for operation.
? It is humanization design with low noise, deep purification and long time free maintenance to save cost from the running process.

Optional mode:
? The customers' request can be met by adopting PLC intelligent control, touch screen and dynamical display.
? On line water tester is available.
? Available in mobile option, immovable option and trailer.
? Oil purifier can be made in hermetical, canopy-covering, open and frame style.

? Color of the oil purifier can follow customers' favor.

MODEL:Description:

Use:
JY is widely used to regenerate and purify the deteriorated transformer oil, circuit breaker oil, capacitor oil, low viscosity lubricating oil, in power generation plants, transformer stations, electric transmission and supplying company, factories, mines, railway transportation, etc.
It can be used as special equipment for electric power transformer maintenance. Not only can it remove water, gas, and other impurities from the oil, but also it can remove oxide materials and remove free carbon in the deteriorated oil to lower the PH value, improve its breakdown voltage and quality. Also serving as the vacuum oiling equipment and drying equipment, this filter can live line work on the spot.

Feature:
? High-efficiency degassing and dehydration system, it has adopted vacuum flash vaporization technology to remove water and gas in oil.
? Precision filtration system, high-quality filter element, multi-stage filtration with gradual precision can help to remove mechanical impurities in the oil.
? Safe heating system with swirling tube, quick temperature increasing, stable and even temperature.
? An advanced fully automatic temperature controlling system, liquid-level controlling system , defoaming controlling system, pressure protecting system and excellent configuration can ensure operation of the equipment with high performance.
? Obvious effect on degraded insulating oil treatment online with its lamps indicative of the conditions of operation, and it is designed flexibly with low noise, deep purification and free maintenance.
? Chain safety protection system, an interlocking of oil drainage system, vacuum system and heating system, which avoids any possible negative impacts caused by incorrect manipulation.

Optional mode:
? The customers'request can be met by adopting PLC intelligent control. Touch screen and dynamical display.
?On online water tester is available.
? Available in mobile option. immovable option and trailer.
?Oil purifier can be made in hermetical, canopy-covering ? open and frame style.
?Color of the oil purifier can follow customers'favor.

MODEL:Application?
This kind of purifier is applicable to purification of various used black engine oil from transport facilities such as ship and automobile. This machine can remove the tiny impurities dispersed in oil such as carbon particles and deep oxides, as well as bad substance such as colloid and bitumen. Thus, the clarity of oil is recovered and the color of used black engine oil is restored.
Features:
1. This machine adopts physical & chemical theory to get the refined and regenerated oil.
2. with the special waste gas collecting and absorbing device, this machine can stop most of the harmful gas going into the air and be friendly to the environment.
3. The fine filtering system use fully-automatic filter press with liquid press method to remove impurities, which have big area to filter impurities and can be operated and maintained easily.
4. The advanced fully-automatic temperature controlling system, liquid-level controlling system, defoaming controlling system, pressure protecting system and excellent equipment can ensure operation of the machine with high performance.
5. Indirect heating used by the heating system to ensure waste oil to be heated evenly and the temperature of waste oil to be stable.
6. The vacuum system is used for high-level removing the micro water and the left gas of the waste oil.
7. This machine also installed phase-sequence and open-phase protection and creepage-proof protection.

MODEL:

Use:
BZL is designed for petroleum industry, petrochemical industry, chemical industry, machine manufacture, coal mining, metallurgy, power plant where are easily exposed to explosion and fire, the heating system, electric equipments, electric machinery, solenoid valves are well-protected with explosion-proof labels indicative of different levels of dangers such as Exd II BT4, Exd II CT4. This filter can be widely applied to the purification of many types of oil such as turbine oil, hydraulic oil, refrigerator oil and lubricanting oil . Through its special fittings, the filter can effectively remove harmful elements such as water, mechanic purity, gas in oil and restore it to a useable condition. It is safe for ammonia containing oil to operate in the filter for a long time.

Feature:
? Designed for preventing firing or exploding environment.
? Unique water/gas removal system, which is enable to fast remove water, gas and light hydrocarbon in oil.
? Precise fine multi-stage filtration helps to remove mechanical impurities in oil.
? An advanced fully automatic temperature controlling system, liquid-level controlling system , defoaming controlling system, pressure protecting system and excellent configuration can ensure operation of the equipment with high performance.
?Online work , allowing separated operation of manual operators from machine with lamps indicating the condition for operation.

?It is humanization design with low noise , deep purification and long time free maintenance to save cost from the running process.
? Chain safe protection system, pressure protection device, interaction of oil inlet and heating, which avoids influence of incorrect manipulation.

Optional mode:
?Available in mobile option. immovable option and trailer.
?Oil purifier can be made in hermetical, canopy-covering , open and frame style.
?Color of the oil purifier can follow customers ' favor.

Parameter List

Item	ParamName		Unit	BZL-20	BZL-30	BZL-50	BZL-100	BZL-150	BZL-200	BZL-300
Technical Parameter	Flow		L/H	1200	1800	3000	6000	9000	12000	18000
	Operating Vacuum Degree		MPa	-0.06? -0.096
	Working Pressure		MPa	?0.5
	Temperature Range		?	20 ? 80
	Power Supply		V	380V/50Hz(or at user's option)
	Working Noise		dB(A)	?78
	Heating Power		Kw	24	24	30	48	72	96	144
	Total Power		Kw	27	27	35	53	80	104	155
	Pipeline Diameter		mm	25	25	32	40	50	50	65
	Net Weight		Kg	550	650	750	880	950	1000	1500
	Overall Dimensions	Length	mm	1100	1150	1250	1350	1500	1500	1650
		Width	mm	1100	1100	1150	1250	1450	1450	1600
		Height	mm	1500	1550	1750	1800	2100	2100	2000
Index for Oil Treatment	Water Content		%	No(GB/T260)
	Gas Content		%	?0.1(GB/T423)
	Mechanical Impurity		%	No(GB/T511)
	Filtration Precision		µm	?10

MODEL:

Use:
This purifier is used as the special equipment for fire-resistant oil purification and regeneration in the thermal power plant, chemical plant and other similar enterprises. It is multi-functional oil purifier, made of stainless steel materials and especial sealing materials. It is functional in degassing, dehydrating, removing impurities and acid, demulsifying and defoaming. It can work online or purify movably.

Feature:
? It is made of the materials fully compatible with the fire-resistant oil, featuring, beautiful appearance, easy operation, low noise and ling service life.
? Precise filtration system, multi-stage filtration with gradual precision can help to remove mechanical impurities in the oil.
? An advanced fully automatic temperature controlling system, liquid-level controlling system, defoaming controlling system, pressure protecting system and excellent equipment can ensure operation of the equipment with high performance.
? Online work, allowing separated operation of manual operators from machine with lamps indicating the condition for operation.
? It is humanization design with low noise, deep purification and long time free maintenance to save cost from the running process.

Optional mode:
? The customers' request can be met by adopting PLC intelligent control, touch screen and dynamical display.
? On line water tester is available.
? Available in mobile option, immovable option and trailer.
? Oil purifier can be made in hermetical, canopy-covering, open and frame style.
? Color of the oil purifier can follow customers' favor.

Parameter List

Item	Name		Unit	ZT-20	ZT-30	ZT-50
Technical Parameter	Flow		L/H	1200	1800	3000
	Operating Vacuum Degree		MPa	-0.06 ? -0.096
	Working Pressure		MPa	? 0.5
	Temperature Range		?	? 80
	Power Supply		V	380V/50Hz(or a user's option)
	Heating Power		kW	24	30	45
	Total Power		kW	33	39	52
	Pipeline Diameter		?	25	25	32
	Net Weight		Kg	400	450	550
	Overall Dimensions	Length	mm	1100	1200	1400
		Width	mm	1100	1200	1400
		Height	mm	1500	1600	1700
Index for Oil Treatment	Water Content		%	No(GB/T260)
	Gas Content		%	? 0.1
	Mechanical Impurity		%	No(GB/T511)

MODEL:

Use:
This unit is used to vacuum-pump of the electrical vacuum device in transformer substation, administration of power supply, power generation plant, and transformer manufactory, and it can vacuum pump in vacuum melting, welding, drying, chemical pharmacy. ZJ operates in vacuum degree of 133Pa, and its limit vacuum degree is 5Pa.But it is unsuitable for pumping toxic gas, explosive gas, high-oxygen content gas, high-moisture content gas, and the gas which will be reaction to pump oil or cause erosive effect on ferrous metal..

Feature:
? Quick starting, high pumping rate, stable performance, easy-handling.
? The unit takes Roots Pump as main pump and spinning vacuum pump ad pre-stage pump..
? A vacuum meter is used to meter and control vacuum of pumped container..
? The unit adopts French Schineider Electric as control element..
? Full-automatic and non-presence of operation with lamps indicating the condition of operation.
? Humanization design, low noise, less energy expenditure, economical to circulate cost.
Optional mode:
? The customers' request can be met by adopting PLC intelligent control, touch screen and dynamical display.
? Available in mobile option, immovable option and trailer.
? Oil purifier can be made in hermetical, canopy-covering, open and frame style.

Parameter List

Name		Unit	ZJ-70	ZJ-150	ZJ-300	ZJ-600	ZJ-1200
Pumping Rate		L/S	70	150	300	600	1200
Vacuum Limit		Pa	?7	?7	?7	?5	?5
Operating Vacuum		Pa	?133
Pumping Stage No.			2	2	2	2	3
Net Weight		Kg	450	600	900	1200	1500
Overall Dimensions	Length	mm	1000	1200	1200	1300	1500
	Width	mm	600	650	700	800	1000
	Height	mm	1400	1500	1600	1800	1900

Dimension and weight will be changed with the changing of the technical specification.

MODEL:

Use:
This purifier is used for purifying and drying power transformer LTC oil. It is suitable for these LTC models like V,MS,M,H,R,RM,T,F,G,especially for are furnace transformer LTC and electrolytic transformer LTC. It can filter the switch oil in fixed time under the transformer system normal operation situation, or filter after the tap changer acts. It can remove free carbon, moisture and oxidant from the oil, to ensure the quality of switch oil, improve the dielectric strength of switch oil, increase the switching times, prolong the inspection and repair intervening time, however reduce the times of power cut, guarantee the voltage quality and make LTC more secure and stable.

Parameter List